Processing Math: Done
To print higher-resolution math symbols, click the
Hi-Res Fonts for Printing button on the jsMath control panel.
No jsMath TeX fonts found -- using image fonts instead.
These may be slow and might not print well.
Use the jsMath control panel to get additional information.
jsMath Control PanelHide this Message

jsMath

2.2 Lineare Gleichungen

Aus Online Mathematik Brückenkurs 1

Wechseln zu: Navigation, Suche
 

Vorlage:Selected tab Vorlage:Not selected tab

 

Contents:

  • First degree equations
  • Equation of a straight line
  • Geometrical problems
  • Regions that are defined using inequalities

Learning outcomes:

After this section, you will have learned how to:

  • Solve algebraic equations, which after simplification results in first degree equations.
  • Convert between the forms y = kx + m and ax + by + c = 0.
  • Sketch straight lines from their equation.
  • Solve geometric problems which contain straight lines.
  • Sketch regions defined by linear inequalities and determine the area of these regions.

First degree equations

To solve first degree equations (also known as linear equations) we perform calculation on both sides simultaneously, which gradually simplifies the equation and ultimately leads to x being alone on one side of the equation.

Example 1

  1. Solve the equation x+3=7.

    Subtract 3 from both sides
    x+3−3=7−3.
    The left-hand side then simplifies to x , and we get
    x=7−3=4.
  2. Solve the equation 3x=6.

    Divide both sides by 3
    33x=36.
    After having cancelled 3 on the left-hand side, we have
    x=36=2.
  3. Solve the equation 2x+1=5.

    First we subtract 1 from both sides to get 2x on its own on the left-hand side
    2x=5−1.
    Then we divide both sides by 2 and get the answer
    x=24=2.

A first degree equation can be written in the normal form ax=b. The solution is then simply x=ba (we must assume that a=0). The possible difficulties that may occur when you solve a first degree equation are thus not in themselves the form of the solution but rather the simplifications that may be needed to achieve the normal form. Below are a couple examples that have in common that an equation can be simplified to linear normal form and thus has a unique solution.

Example 2

Solve the equation2x−3=5x+7.


Since x occurs on both the left- and right-hand sides we subtract 2x from both sides Vorlage:Displayed math and now x only appears on the right-hand side Vorlage:Displayed math Now we subtract 7 from both sides Vorlage:Displayed math and get 3x on its own on the right-hand side Vorlage:Displayed math The last step is to divide both sides by 3 Vorlage:Displayed math and this gives that Vorlage:Displayed math

Example 3

Solve for x in the equation ax+7=3x−b.


By subtracting 3x from both sides Vorlage:Displayed math Vorlage:Displayed math and then subtract 7 Vorlage:Displayed math Vorlage:Displayed math We have gathered together all the terms that contain x on the left-hand side and all other terms on the right-hand side. Since the terms on the left-hand side have x as a common factor x can be factored out Vorlage:Displayed math Divide both sides with a−3 giving Vorlage:Displayed math

It is not always obvious that you are dealing with a first degree equation. In the following two examples simplifications turn the original equation into a first degree equation.

Example 4

Solve the equation (x−3)2+3x2=(2x+7)2.


Expand the quadratic expressions on both sides Vorlage:Displayed math Vorlage:Displayed math Subtract 4x2 from both sides Vorlage:Displayed math Add 6x to both sides Vorlage:Displayed math Subtract 49 from both sides Vorlage:Displayed math Divide both sides by 34 Vorlage:Displayed math

Example 5

Solve the equation  x+2x2+x=32+3x.


Collect both terms to one side Vorlage:Displayed math Convert the terms so that they have the same denominator Vorlage:Displayed math and simplify the numerator Vorlage:Displayed math Vorlage:Displayed math Vorlage:Displayed math This equation only is satisfied when the numerator is equal to zero (whilst the denominator is not equal to zero); Vorlage:Displayed math which gives that x=−54.


Straight lines

Functions such as Vorlage:Displayed math Vorlage:Displayed math Vorlage:Displayed math

are examples of linear functions, and they generally can be put into the form

Vorlage:Displayed math

where k and m are constants.

The graph of a linear function is always a straight line and the constant k indicates the slope of the line with respect to the x-axis and m gives the y-coordinate of the point where the line intersects the y-axis.

[Image]

The line y = kx + m has slope k and cuts the y-axis at (0,m)

The constant k is called the slope and means that a unit change in the positive x-direction along the line gives k units change in the positive y-direction. Thus if

  • k0 the line slopes upwards,
  • k0 the line slopes downwards.

For a horizontal line (parallel to the x-axis) k=0 whereas a vertical line (parallel to the y-axis) does not have a k value ( a vertical line cannot be written in the form y=kx+m).

Example 6

  1. Sketch the line y=2x−1.

    Comparing with the standard equation y=kx+m we see that k=2 and m=−1. This means that the line's slope is 2 and that it cuts the y-axis at (0−1). See the figure below to the left.
  2. Sketch the line y=2−21x.

    The equation of the line can be written as y=−21x+2 , and then we see that its slope is k=−21and that m=2. See the figure below to the right.

[Image]

[Image]

Line y = 2x - 1 Line y = 2 - x/2

Example 7

What is the slope of the straight line that passes through the points (21) and (53)?


If we plot the points and draw the line in a coordinate system, we see that 5−2=3 steps in the x-direction corresponds to 3−1=2 steps in the y-direction along the line. This means that 1 step in the x-direction corresponds to k=5−23−1=32 steps in the y-direction. So the line's slope is k=32.

python

Two straight lines that are parallel clearly have the same slope. It is also possible to see (such as in the figure below) that for two lines having slopes k1 and k2 and also are perpendicular then k2=−1k1, which also can be written as k1k2=−1.

[Image]

The straight line in the figure on the left has slope k, that is 1 step in the x-direction corresponds to k steps in the y-direction. If the line is rotated 90 clockwise, we get the line in the figure to the right, and that line has slope −k1 because now −k steps in the x-direction corresponds to 1 step in the y-direction

Example 8

  1. The lines y=3x−1 and y=3x+5 are parallel.
  2. The lines y=x+1 and y=2−x are perpendicular.

All straight lines (including vertical lines) can be put into the general form

Vorlage:Displayed math

where a, b and c are constants.

Example 9

  1. Put the line y=5x+7 into the form ax+by=c.

    Move the x-term to the left-hand side: −5x+y=7.
  2. Put the line 2x+3y=−1 into the form y=kx+m.

    Move the x-term to the right-hand side 3y=−2x−1and divide both sides by 3 Vorlage:Displayed math

Here you can see how an equation for a line can be obtained if we know the coordinates of two points on the line.

Here you can vary k and m and see how this affects the line's characteristics.


Regions in a coordinate system

By geometrically interpreting inequalities, one can describe regions in the plane.

Example 10

  1. Sketch the region in the xy-plane that satisfies y2.

    The region is given by all the points (xy) for which the y-coordinate is equal or greater than 2 that is all points on or above the line y=2.

    [Image]

  2. Sketch the region in the xy-plane that satisfies yx.

    A point (xy) that satisfies the inequality yx must have an x-coordinate that is larger than its y-coordinate. Thus the area consists of all the points to the right of the line y=x.

    [Image]

    The fact that the line y=x is dashed means that the points on the line do not belong to the coloured area.

Example 11

Sketch the region in the xy-plane that satisfies 23x+2y4.


The double inequality can be divided into two inequalities

Vorlage:Displayed math

We move the x-terms into the right-hand side and divide both sides by 2 giving

Vorlage:Displayed math

The points that satisfy the first inequality are on and above the line y1−23x while the points that satisfy the other inequality are on or below the line y2−23x.

[Image]

The figure on the left shows the region 3x+2y2  and figure to the right shows the region 3x+2y4 .


Points that satisfy both inequalities form a band-like region where both coloured areas overlap.

[Image]

The figure shows the region 23x+2y4 .

Example 12

If we draw the lines y=x, y=−x and y=2 then these lines bound a triangle in a coordinate system.

[Image]

We find that for a point to lie in this triangle, it has to satisfy certain conditions.

We see that its y-coordinate must be less than 2. At the same time, we see that the triangle is bounded by y=0 below. Thus the y coordinates must be in the range 0y2.

For the x-coordinate, the situation is a little more complicated. We see that the x-coordinate must satisfy the fact that all points lie above the lines y=−x and y=x. We see that this is satisfied if −yxy. Since we already have restricted the y-coordinates, we see that x cannot be larger than 2 or less than −2.

Thus the base of the triangle is 4 units of length and the height 2 units of length.

The area of this triangle is therefore 422=4 units of area.


Exercises

Study advice

Basic and final tests

After you have read the text and worked through the exercises, you should do the basic and final tests to pass this section. You can find the link to the tests in your student lounge.


Keep in mind that ...

Draw your own diagrams when you solve geometrical problems and draw carefully and accurately! A good diagram can mean you are halfway to a solution, but a poor diagram may well fool you.


Useful web sites

Experiment with Equations of a Straight Line

Experiment with Archimedes Triangle & Squaring of Parabola.

Von „http://wiki.sommarmatte.se/wikis/2009/bridgecourse1-TU-Berlin/index.php/2.2_Lineare_Gleichungen“